Our Product DataSheet

Property Units Test Method PA 6 PA 6M
Mo S2		 PA XLU
Oilon		 UHMW Poly
Acetal		 PP Ptfe
Specific Gravity - ASTM D792 1.16 1.17 1.15 0.935 1.4 0.9 2.2
Tensile Strength psi ASTM D638 12000-13000 12000-13500 9500-11000 3100 9500 4800 3900
Tensile Elongation % ASTM D638 20-45 20-45 45-55 - 30 12 300
Tensile Modulus psi ASTM D638 485000-550000 485000-550000 485000-550000 125000 400000 195000 80000
Comprehensive Strength(@ 10% Offset) psi ASTDM D695 15500-18000 15500-18000 12000-14000 2000 15000 7000 3500
Comprehensive Modulus psi ASTM D695 300000-350000 300000-350000 275000- 375000 - 400000 - 70000
Flexural Strength psi ASTM D790 15500-17500 15500-17500 14000-16000 - 12000 7000 No Break
Flexural Modulus psi ASTM D790 420000 - 500000 420000 - 500000 375000-475000 125000 400000 180000 72000
Shear Strength psi ASTM D732 10000-11000 10000-11000 8000-9000 - - - -
Hardness - Shore-'D' D ASTM D2240 80-85 82-85 78-83 62-66 88-93 60-65 50
Melting Point Deg C ASTM D789 230 240 220 ---- 168 164 335
Coefficient Of Linear Thermal Expansion in/in/Deg F ASTM D696 5.0*10-5 5.0*10-5 3.5*10-5 11.1*10-5 5.4*10-5 6.2*10-5 7.5*10-5
Deformation under Load % ASTM D621 0.5-2.5 0.5-2.5 0.5-3.0 --- --- --- ---
Deflection Temp. 264 psi
66psi		 Deg C Deg C ASTM D648 149-218
204-218		 149-218
2014-218		 149-218
2014-218		 104
---		 52
---		 55
---
Continuous Service temp. in air Deg C - 120 130 110 82 82 75 220
Intermittent Service Temp. Deg C - 160 170 160 ---- ---- 82 260
Dielectric Constant@ 60 Cycles
@1000Cycles
@100000Cycles		 ---- ASTM D150 3.7
3.7
3.7
 3.7
3.7
3.7
 ----- 2.3
----		 ----3.8
-----		 ----
2.25
----		 ----
2.1
----
Tensile Impact ft. lbs./in2 ASTM D1822 ---- ---- 33-36 ---- ---- ---- ----
Coefficient of friction Static Dynamic ---- ---- ---- ---- 0.19-0.22 0.11-0.12 ---- ---- ----

This information is presented as a guide for material. Classic Polymers & Resins makes no expressed or implied warranty for materials selected solely on the basis of the information contained herein.

NOTE : INFORMATION ON OTHER MATERIALS AND MODIFIED GRADES IS AVAILABLE ON REQUEST. MAIL US AT : info@classicpolymers.co.in